The thermal fuse is divided into polyester thermal fuse and nylon thermal fuse , which can be controlled between 85 ° C and 180 ° C by adjusting the raw material characteristics.

In the normal temperature state, the hot fuse and other fibers are woven into the fabric, and then in the dry heat or wet heat state, the pressure is applied to the fabric, when the temperature is higher than the melting point of the hot fuse, the hot fuse gradually melts. At this temperature, conventional fibers remain unchanged and are bonded together by the hot fuse.

The hot fuse is mixed with other fibers to produce nonwovens or knitted or woven into hot bonded fiber products, which have the characteristics of soft feel, high strength, washable, crisp, stereotyped and easy to take care of.

Therefore, the hot fuse can replace glue and other chemical adhesives, avoid the pollution of volatile matter and powder layer, environmental protection and non-toxic; At the same time, it saves the process flow and reduces the downstream production cost.

Nylon hot melt wire is a special nylon thermal fuse after the glue, the bonding effect, environmental protection, safety and no odor, is a rapid development of high-tech products in the world.

Fujian ZhangpingXielong Group High-tech Chemical Fiber Company Co., Ltd. leading products of include：nylon thermal fuse, TPU special filament, polyester thermal fuse, TPU hot melt omentum, PA hot melt omentum,.The company has always adhered to the 3s core service tenet: "saving time, cost savings, saving losses", advocates a total of industrial value, and is committed to providing a better solution for the overall industrial chain. Plan, welcome to buy the nylon thermal fuse，polyester thermal fuse!