The hot fuse is divided into polyester hot fuse and nylon thermal fuse. The melting point can be controlled between 85℃ and 180℃ by adjusting the raw material characteristics.

At room temperature, the hot fuse and other fibers are woven into fabric, and then in the dry heat or wet heat state, the pressure is applied to the fabric. When the temperature is higher than the melting point of the hot fuse, the hot fuse gradually melts. At this temperature, conventional fibers remain unchanged and are glued together by the hot fuse.

Nylon thermal fuse is mixed with other fibers to produce nonwovens or knitted or woven into hot adhesion fiber products, with soft feel, high strength, washable, crisp, shaping, easy to manage and so on.

Nylon hot fuse wire is a special nylon wire hot melt after the change of glue, bonding, environmental protection and safety without odor, is a rapidly developing high-tech products in the world.

Nylon hot melt wire is spun from polyamide with low melting point. Low melting point polyamide is a modified polyester. Nylon hot fuse made of low melting point polyamide has the advantages of low melting point, high thermal adhesion strength and stable physical and chemical properties.

Characteristics of nylon thermal fuse:

1, low melting point, low melting point of nylon hot fuse to 90℃.

2. Good wear resistance. The wear resistance of polyamide fiber is the best among all textile fibers.

3, high fracture strength. The breaking strength of long polyamide fiber for textile is 5.0 ~ 6.4g/d.

4. The dyeability of polyamide fibers is better than that of natural fibers, but it is still easier to stain than other synthetic fibers, usually acidic dyes.

Nylon hot melt wire can replace polypropylene, polyamide hot melt adhesive in some fields, but also has its own unique application field. It is widely used in hot air vamp manufacturing, yarn manufacturing, clothing manufacturing, clothing stitching lock, soft gauze curtain vertical curtain and other textile fields.

Fujian ZhangpingXielong Group High-tech Chemical Fiber Company Co., Ltd. leading products of include:nylon thermal fuse, TPU special filament, polyester thermal fuse, TPU hot melt omentum, PA hot melt omentum,.The company has always adhered to the 3s core service tenet: "saving time, cost savings, saving losses", advocates a total of industrial value, and is committed to providing a better solution for the overall industrial chain. Plan, welcome to buy the nylon thermal fuse，polyester thermal fuse!