The plum rain season in the Jiangnan region is often accompanied by continuous overcast and rainy weather, humid air and muggy climate. Such an environment poses a considerable challenge to the storage of nylon thermal fuses. If not properly stored, nylon thermal fuses are prone to moisture, which can affect their performance and usage effect, and even cause unnecessary economic losses. Only by mastering scientific preservation methods can we ensure that nylon thermal fuses remain in good condition even during the rainy season.

Sealed packaging is the key

The first step in storing nylon thermal fuses during the rainy season is to ensure the sealing of their packaging. The original nylon thermalmelt packaging usually has a certain degree of moisture resistance, but during the rainy season, this is far from enough. A thick sealed plastic bag can be placed over it to squeeze out as much air as possible and then seal the bag opening to prevent the outside moist air from coming into direct contact with the nylon thermal melt. If conditions permit, vacuum packaging bags can also be used. By removing the air to create a relatively dry vacuum environment, the shelf life of nylon thermalfuses can be extended more effectively.

Choose the right storage environment

The choice of storage environment is of vital importance. Nylon thermal fuses should be placed in a dry and well-ventilated indoor area, avoiding proximity to Windows, water pipes and other areas prone to moisture. The ground is prone to moisture. It is recommended to use wooden or plastic pallets to raise the nylon thermal fuse and keep it at a certain distance from the ground. If the indoor humidity is difficult to control, a dehumidifier can be placed in the storage area to monitor and reduce the air humidity in real time. You can also place some desiccants, such as silica gel desiccants, quicklime, etc. Regularly replace the expired desiccants to maintain a dry storage environment.

Stack them reasonably for easy access

When stacking nylon thermal fusible wires, the "first in, first out" principle should be followed. Place the products purchased first in easily accessible locations to reduce the risk of moisture due to prolonged storage. At the same time, avoid stacking too high to prevent the nylon thermal fuse at the bottom from deforming due to pressure. Neat and reasonable stacking not only facilitates access but also, to a certain extent, reduces the problem of moisture absorption caused by damaged packaging.

Regular inspection and maintenance

Even if comprehensive preservation measures have been taken, we cannot be complacent. During the plum rain season, it is necessary to regularly check whether the packaging of the nylon thermal melt is intact and whether there are any signs of moisture, such as water droplets on the packaging surface or adhesion of the nylon thermal melt. Once any abnormality is detected, the damp part should be isolated promptly and used or dried as soon as possible to prevent the damp area from expanding.

Although the plum rain season in the south of the Yangtze River brings many inconveniences, as long as the above preservation techniques are mastered and carefully cared for, the nylon thermal melt can safely survive in a humid environment, providing a reliable guarantee for subsequent use.

Fujian Zhangping Xielong Group High-tech Chemical Fiber Company Co., Ltd. leading products of include：nylon thermal fuse, TPU special filament, polyester thermal fuse, TPU hot melt omentum, PA hot melt omentum,.The company has always adhered to the 3s core service tenet: "saving time, cost savings, saving losses", advocates a total of industrial value, and is committed to providing a better solution for the overall industrial chain. Plan, welcome to buy the nylon thermal fuse，polyester thermal fuse!