Why does the bonding temperature affect the use of TPU hot-melt net film?

TPU hot-melt mesh film is widely used, and the applicable industries and materials span are relatively large, basically covering all aspects of our housing, wearing, and transportation. But if you don't have a good grasp of the bonding temperature of TPU hot-melt mesh, the effect will be greatly reduced.

The relationship between bonding temperature, time and the use effect of TPU hot-melt mesh.

The bonding temperature is a very important factor that affects the use of hot melt adhesive film, because the TPU hot melt web film only starts to melt at a certain temperature, so special attention should be paid to it. If the application temperature is too low, it will cause insufficient melting of the TPU hot-melt mesh film, poor fluidity, and affect the bonding effect; if the application temperature is too high, the TPU hot-melt mesh film will be over-melted, and the hot pressing time will not be adjusted in time, which will cause The glue penetration is too large, resulting in insufficient glue layer.

It should be noted that the operation time of TPU hot-melt mesh film bonding is adjusted according to the corresponding temperature. In the case of high temperature, the time should be shorter; in the case of low temperature, the time should be extended accordingly.

Fujian Zhangping Xielong High-tech Chemical Fiber Co., Ltd. is a professional supplier of material spinning, weaving and dyeing for shoe textiles. The main products are nylon thermal fuse, polyester thermal fuse, TPU special filament, and TPU hot-melt omentum, PES hot melt adhesive omentum, PA hot melt omentum, etc.

The launch of Xielong Group's new materials will provide environmentally friendly, safe, and better-performing products for the development of shoe materials, clothing, luggage, furniture, decoration and other industries.

If you want to know more product information, please contact: Ms. Jiang 18861266688 Manager Chen 13960259999 Website: http://www.xlfiber.com